626 ES V6-2.5L DOHC (1997)
NOTE:
Guard bracket assemblies are identical for left and right side.
3.
Position the guard bracket (A) to the damper and align the bolt holes with guard bracket (B).
4.
Install the two bolts, each with tightening torque of 28.8 - 36.0 ft-lbs (39.2 - 49 Nm, 4.0 - 5.0 kgf m)
5.
Install guard assembly on the other side of vehicle.
6.
Reinstall both front wheels and torque the nuts to 65 - 86 ft-lbs (89.0 - 117.0 Nm, 9.0 - 12.0 kgf m).
C.
AUTHORIZED MODIFICATION LABEL INSTALLATION
Complete an "Authorized Modification Label" with the SSP number written on the sticker and affix it to the driver's door. Refer back to the illustration
under "A. VEHICLE INSPECTION PROCEDURE".