626 ES V6-2.5L DOHC (1997)
9. Hold the one-way clutch outer race. Verify that the inner race rotates smoothly in the counterclockwise direction only. If the one-way clutch inner
race turns only clockwise, the spring cage could be installed upside down.
10. Align the splines of the one-way clutch inner race with the splines on the small sun gear hub as shown in the figure.
11. Install a new snap ring.
12. Verify that when the small sun gear is held, the one-way clutch outer race turns smoothly and only clockwise.
13. Apply petroleum jelly to the thrust bearing and secure it to the sun gear drum. Thrust bearing outer diameter is 72.0 mm (2.83 inch).