626 ES V6-2.5L DOHC (1997)
4. Insert the piston and N-R accumulator spring.
5. Insert the N-R accumulator gasket plate.
6. Tighten the plate bolt to 6.5 - 7.8 Nm (58 - 69 inch lbs.).
7. Apply ATF to the seal rings, and install them onto the 1-2 accumulator piston.
8. Install the piston and 1-2 accumulator spring.
9. Install the 1-2 accumulator gasket and plate.
10. Tighten the plate bolt to 6.5 - 7.8 Nm (58 - 69 inch lbs.).
11. Install the bypass valve spring, bypass valve, stop plug, and stop pin.
12. Install the cut back spring, cut back valve B, cut back valve A, stop plug, and stop pin.
