626 ES V6-2.5L DOHC (1997)
Locknut
1. Knock the crimped portion of the locknut outward by using a chisel and a hammer.
2. Lock the hub by applying the brakes.
3. Remove the locknut.
Lower arm ball joint
1. Remove the clinch bolt and nut.
2. Wrap a rag around the ball joint dust boot.
3. Pry the lower arm out of the knuckle.
Engine mount member
Suspend the engine by using the SST and remove the engine mount member.
Drive shaft
CAUTION: The sharp edges of the drive shaft can slice or puncture the oil seal. Be careful when removing the drive shaft from the transaxle.