626 ES V6-2.5L DOHC (1997)
2. Align the marks, and install the outer ring onto the shaft.
3. Install a new clip.
4. Install the boot.
5. Set the drive shaft to the standard length. Left side should be 650.7 - 660.7 (25.62 - 26.01) and the right side should be 600.7 - 610.7 (23.65 -
24.04).
6. Release trapped air from inside the boot (differential side) by using a screwdriver covered with a rag.
7. Verify the drive shaft length.
8. If not within specification, return to Step 5.
Boot band
1. Fold the band back in the direction opposite the forward revolving direction of the drive shaft and use pliers to pull it tight.
2. Lock the end of the band by bending the locking clips.
Automatic Transaxle
