626 ES V6-2.5L DOHC (1997)
Transmission Temperature Sensor/Switch: Service and Repair
Replacement
1. Remove the control valve body cover.
2. Disconnect the transaxle fluid temperature sensor connector.
3. Remove the transaxle fluid temperature sensor by using the Special Service Tool (SST).
4. Install a new transaxle fluid temperature sensor by using the SST.
Tightening torque: 7.9-10.7 Nm (70-95.4 in.lbs.)
5. Connect the transaxle fluid temperature sensor connector.
6. Install the control valve body cover.
7. Carry out the line pressure test.
