626 LX L4-2.0L DOHC (1999)
Antenna Motor: Service and Repair
Removal/Installation
POWER ANTENNA REMOVAL/INSTALLATION
CAUTION: When installing the power antenna, not tightening the mounting nut fully could cause poor radio reception. When installing the power
antenna, securely tighten the mounting nut according to the specified torque value.
1. Disconnect the negative battery cable.
2. Turn over the trunk compartment covering from passenger's side.
3. Remove in the order indicated in the table.
4. Install in the reverse order of removal.
Mounting Nut Removal Note
Use snap-ring pliers to remove the mounting nut.
