mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

All Technical Service Bulletins for Brake Master Cylinder: > < Recall - Master Cylinder Cap Replacement
Page 1
background image

Brake Master Cylinder: Recalls
Recall 00V074000: Brake Reservoir Cap Defect

Certain reservoir tank caps on the brake master cylinder were produced with a worn out die and lack ventilation holes. As a result, the pressure in the
reservoir tank can drop gradually as the brake pad or shoe wears and ambient temperature drops. Also, the pressure could reach a point that the brake
caliper and drum cylinder are pulled back by the vacuum in the reservoir tank when the vehicle is parked for a long time.

This condition could cause reduced brake efficiency, increasing the risk of a crash.

Dealers will inspect the reservoir cap and replace it, if necessary.

Owner notification began April 21, 2000. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the
free remedy within a reasonable time should contact Mazda at 1-800-222-5500. Also contact the National Highway Traffic Safety Administration's Auto
Safety Hotline at 1-888-DASH-2-DOT (1-888-327-4236).

All Technical Service Bulletins for Brake Master Cylinder: > < Recall - Master Cylinder Cap Replacement