626 LX L4-2.0L DOHC (1999)
-
Hold the crankshaft by using the Special Service Tool (SST)
Caution:
-
The crankshaft position sensor rotor is on the rear of the crankshaft pulley, and can be damaged easily.
Cylinder Head Cover Removal Note
-
Loosen the cylinder head cover bolts in two or three steps in the order shown.
No.3 Engine Mount Rubber Removal Note
1. Suspend the engine by using the chain block.
2. Remove the No.3 engine mount rubber.
Timing Belt Removal Note
1. Install the pulley lock bolt.
2. Turn the crankshaft clockwise and align the timing marks.
3. Turn the tensioner clockwise by using an Allen wrench.
