626 LX L4-2.0L DOHC (1999)
Steering Gear: Service and Repair
Hydraulic System Bleeding
AIR BLEEDING
1. Inspect the fluid level.
2. Jack up the front of the vehicle and support it on safety stands.
3. Turn the steering wheel fully to the left and right several times with the engine not running.
4. Inspect the fluid level again. If it has dropped, add fluid.
5. Repeat steps 2 and 3 until the fluid level stabilizes.
6. Lower the vehicle.
7. Start the engine and let it idle.
8. Turn the steering wheel fully to the left and right several times.
9. Verify that the fluid is not foamy and that the fluid level has not dropped.
10. Add fluid as necessary and repeat steps 7 and 8.
