626 LX L4-2.0L DOHC (1999)
Shifter A/T: Service and Repair
Removal / Installation
Selector Lever And Cable Removal / Installation
1. Disconnect the negative battery cable.
2. Remove the steering column cover.
3. Remove the side panel.
4. Remove the lower panel.
5. Remove the front console.
6. Remove the heater unit.
7. Remove the SAS control module bracket.
8. Remove in the order indicated in the table.
9. Install in the reverse order of removal.
10. Install the SAS control module bracket.
11. Install the heater unit.
12. Install the front console.
13. Install the lower panel.
14. Install the side panel.
15. Install the steering column cover.
16. Connect the negative battery cable.
Indicator Panel Removal Note