626 LX V6-2.5L DOHC (1997)
NOTE:
-
Install the ABS hydraulic unit onto the bracket, being careful not to catch the ABS motor harness between the pump and the bracket at point A.
-
Route the solenoid harness under the connector as shown in B.
-
Route the solenoid harness under the ABS motor harness and tie them together with a band as shown in C.
-
Fix both connectors to the bracket.
4. Add brake fluid, bleed the air, and check for fluid leakage.
5. Verify that the diagnostic trouble codes have been canceled. See: Testing and Inspection