626 LX V6-2.5L DOHC (1997)
7. Retighten the bolts in the order shown.
Tightening torque: 11.3 - 14.2 Nm {115 - 145 kgf/cm, 100 - 125 inch lbs.}
8. Apply clean engine oil to the lip of the new camshaft oil seal.
9. Push the oil seal slightly in by hand.
10. Tap the camshaft oil seal by using the SST.
11. Tap in the new blind cap by using a plastic hammer.
Camshaft Pulley Installation Note
1. Install the camshaft pulley so that the "R" mark (RH) can be seen and the timing mark aligns with the camshaft knock pin.
