626 LX V6-2.5L DOHC (1997)
Terminal Identification
Action Chart
Step 2
1. Remove the column cover.
2. Turn the ignition switch to ON.
3. Measure the voltage at terminal 2F (B/G) of the combination switch connection
Terminal Identification
Action Chart
Step 3
1. Turn the turn switch on (left or right).
2. Measure the voltage at terminal 1G (G/Y) or 1H (B/R) of the combination switch connector.
Voltmeter Connection
Action Chart
Step 4
Set the turn switch to the right position and measure the voltage at terminal E (B/R) of the flasher unit connector.