mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

ABOUT US
Closed Throttle Position Switch <--> [Throttle Full Close Switch] > < Component Tests and General Diagnostics|Page 2450

626 LX V6-2.5L DOHC (1997)

Page 1
background image

Vehicle Speed Sensor: Service and Repair

REPLACEMENT

1. Disconnect the negative battery cable.
2. Remove the air cleaner assembly, battery and battery carrier.
3. Disconnect the vehicle speedometer sensor connector.
4. Remove the vehicle speedometer sensor.
5. Apply ATF to a new 0-ring and install it on a new vehicle speedometer sensor.
6. Install the vehicle speedometer sensor.

Tightening torque: 7.9-10.7 Nm (70-95 in.lbs.)

7. Connect the vehicle speedometer sensor connector.
8. Install the battery carrier, battery, and air cleaner assembly.
9. Connect the negative battery cable.

Closed Throttle Position Switch <--> [Throttle Full Close Switch] > < Component Tests and General Diagnostics|Page 2450