626 LX V6-2.5L DOHC (1997)
Overdrive Off Switch: Service and Repair
REPLACEMENT
1. Disconnect the negative battery cable.
2. Remove the front console.
3. Remove the indicator panel installation screws.
4. Disconnect the connector and remove the O/D OFF switch terminals.
5. Remove the selector lever knob assembly.
6. Install a new selector lever knob assembly.
Tightening torque: 2.0-2.9 Nm (18-26 in.lbs.)
7. Install the O/D OFF switch terminals and connect the connector.
8. Install the indicator panel installation screws.
9. Install the front console.
10. Connect the negative battery cable.
