Testing and Inspection of Shift Solenoid A for 1997 626 LX V6-25L DOHC
Shift Solenoid: Testing and Inspection
Shift Solenoid B
Resistance
1. Disconnect the negative battery cable.
2. Remove the resonance chamber, fresh-air duct and air cleaner assembly.
3. Disconnect the solenoid valve connector.
Shift Solenoid Connector
4. Measure the resistance between terminal B and a ground.
5. If not correct, check the wiring harness, replace the solenoid valve, if necessary.
6. Connect the solenoid valve connector.
7. Install the resonance chamber, fresh-air duct and air cleaner assembly.
8. Connect the negative battery cable.
Operation
1. Disconnect the negative battery cable.
2. Disconnect the solenoid valve connector.
3. Apply battery voltage to terminal B.
4. Verify that the control valve operates with a "click".
5. If the "click" is not heard, replace the solenoid valve.
