626 LX V6-2.5L DOHC (1997)
1. Align the marks, and slide the oil cooler hose onto the oil cooler pipe until it is fully seated as shown.
2. Install the hose clamp onto the hose at the center of the mark and at the angle shown.
3. Verify that the hose clamp does not interfere with any other parts.
AFTER INSTALLATION
1. Add ATF to the specified level.
2. Connect the negative battery cable.
3. Inspect for oil leakage from the oil pipes and oil hoses.
4. Inspect the ATF level and condition.
5. Carry out the line pressure test.
6. Carry out the road test.
