mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Remote Trunk Lid Opener - Fails To Operate|Page 5221 > < Remote Trunk Lid Opener - Fails To Operate|Page 5212
Page 1
background image

Trunk / Liftgate Striker: Customer Interest
Remote Trunk Lid Opener - Fails To Operate

Bulletin No.: 039/93
Issued: 9/9/93
Revised:

Category

S

Applicable Model/s
1992 - 93 929

Subject:
REMOTE TRUNK LID OPERATION FAILS TO OPERATE

APPLICABLE MODELS/VINS
929 Model
1992 - Vehicles with a VIN of JMIHD461*N0100001 through JM1HD461*N0199999
1993 - Vehicles with a VIN of JM1HD4G1*P0200001 through JM1HD461*P0216486

NOTE

The asterisk (*) in the VIN range can be any number (0 through 9) or "X".

DESCRIPTION
The trunk lid may fail to open when using the remote function. This may be caused by spring force against the trunk lid striker. To correct this condition,
the strength of the striker lift spring has been decreased.

REPAIR PROCEDURE

1.

Verify that current flows to the striker assembly connector when the remote button is pushed.

2.

If current is present, install a modified trunk lid striker assembly by following the instructions in section S of the workshop manual.

3.

If current is not present, refer to the Body Electrical Troubleshooting manual for diagnostic instruction.

PARTS INFORMATION

Remote Trunk Lid Opener - Fails To Operate|Page 5221 > < Remote Trunk Lid Opener - Fails To Operate|Page 5212