929 V6-3.0L DOHC (1993)
1. Install the oil pan baffle plate to the oil pan upper block.
Tightening torque:
1.8 - 2.9 Nm (18 - 3O kgf.cm, 16 - 26 in.lbf)
2. Apply silicone sealant to the oil pan upper block as shown.
3. Install the oil pan upper block within five minutes of applying the sealant.
Fig. 42 Oil Pan Upper Block Assembly Bolt Tightening Sequence
4. Install the oil pan block assembly to the cylinder block, tighten bolts in two or three steps in the order shown.
Tightening torque:
7.9 - 10.7 Nm (80 - 11O kgf.cm, 70 - 95.4 in.lbf)
