929 V6-3.0L DOHC (1993)
9. Check the timing belt deflection.
Timing belt deflection:
5 - 7 mm (0.20 - 0.28 in)/98 N (10 kg, 22 lb)
Caution: Be sure not to apply tension other than that of the auto tensioner.
10. If the deflection is not correct, check the timing belt auto tensioner and replace if necessary.
Crankshaft pulley:
Caution: The crankshaft position sensor rotor is on the rear of the pulley, and can be damaged easily.
-
Install the crankshaft pulley by using the SST.
Tightening torque: 157 - 166 Nm (16 - 17 m-kg, 116 - 122 ft lb)
Steps After Installation:
1. Fill the radiator and coolant reservoir with the specified amount and type of engine coolant.
2. Perform the necessary engine adjustments.
