929 V6-3.0L DOHC (1993)
Crankshaft Position Sensor: Service and Repair
CRANKSHAFT POSITION SENSOR 1
The crankshaft position sensor 1 is an integral component of the ignition distributor assembly and is not serviced separately.
CRANKSHAFT POSITION SENSOR 2
Replacement
View: Crankshaft Position Sensor 2
1. Disconnect the crankshaft position sensor connector.
2. Remove the crankshaft position sensor bolt.
3. Install in the reverse order of removal.
Tightening Torque: 7.8 - 11 Nm (69 - 95 in.lb.)