929 V6-3.0L DOHC (1993)
Neutral Safety Switch: Adjustments
Park/Neutral Switch Adjustment
1.
Remove selector rod from manual shaft lever.
2.
Move manual shaft to N range position.
3.
Loosen switch mounting bolts.
4.
Align holes in switch and manual shaft lever by inserting a pin of approximately 0.157 in (4.0 mm) diameter.
5.
Tighten switch mounting bolts to 22 - 35 in lb (2.5 - 3.9 Nm) and remove pin.
6.
Recheck continuity. If not correct, replace switch.
7.
Install selector rod to manual shaft lever.
