929 V6-3.0L DOHC (1993)
Transmission Speed Sensor: Service and Repair
Vehicle Speed Sensor 1 (Revolution Sensor)
Replacement
1. Disconnect the negative battery cable.
2. Remove the front exhaust pipe (left side).
3. Disconnect the vehicle speed sensor 1 connector.
4. Remove the vehicle speed sensor 1.
5. Apply ATF to a new O-ring and install it on the vehicle speed sensor 1.
6. Install the new vehicle speed sensor 1. Tightening torque:
Tightening torque: 5.0 - 6.8 N.m (50 - 70 kgf.cm, 44 - 80 In.lbf)
7. Connect the vehicle speed sensor 1 connector.
8. Install the front exhaust pipe.
9. Connect the negative battery cable.