929 V6-3.0L DOHC (1993)
Shift Interlock Solenoid: Service and Repair
Key Interlock Solenoid
Replacement
1. Disconnect the negative battery cable.
2. Remove the column cover.
3. Disconnect the key interlock solenoid connector.
4. Remove the screws and the key interlock solenoid.
5. Install the key interlock solenoid and tighten the screws.
Tightening torque: 6.9 - 12.7 N.m (70 - 130 kgf.cm, 61 - 112 in.lbf)
6. Verify that the key interlock solenoid operates.
7. Connect the key interlock solenoid connector.
8. Install the column cover.
9. Connect the negative battery cable.