929 V6-3.0L DOHC (1993)
6. Measure the voltage between terminals A and B with the rear wheels turning slowly.
7. If the pointer does not move, check the vehicle speed sensor 2 continuity.
8. Measure the resistance between terminals A and B.
Resistance: Approx. 290 Ohms (at 20 °C, 68 °F)
9. It not correct, replace the vehicle speed sensor 2.
10. Apply ATF to a new O-ring and Install it on the vehicle speed sensor 2.
11. Install the vehicle speed sensor 2.
Tightening torque: 5.0 - 6.8 N.m (50 - 70 kgf.cm, 44 - 60 in.lbf)
12. Connect the vehicle speed sensor 2 connector.
13. Install the front exhaust pipe.
14. Connect the negative battery cable.