929 V6-3.0L SOHC (1989)
Wheel Speed Sensor: Service and Repair
Front Wheel Speed Sensor & Rotor
Fig. 82 Front Wheel Speed Sensor & Rotor Replace
1.
Disconnect battery ground cable, then the tire and wheel assembly.
2.
Remove front brake caliper, then the cap from hub, Fig. 82.
3.
Remove the hub nut and washer, then the disc rotor.
4.
Remove bolt and wheel speed sensor from knuckle.
5.
Remove sensor rotor using SST.
6.
Reverse procedure to install. Torque wheel speed sensor bolt to 12-17 ft. lbs. Ensure sensor rotor chamfered edge faces hub.