929 V6-3.0L SOHC (1989)
Extension Manifold, Gasket, And O-Ring
2.
When installing dynamic chamber and extension manifolds, use a new drain hole O-ring under the dynamic chamber, and new O-rings and gaskets
on the extension manifolds. Lightly lubricate O-rings with clean engine oil prior to installation. Use an appropriate sealer or adhesive to hold
gaskets in place during assembly, if necessary.
3.
Tighten all manifold nuts and bolts to the specified torque.
MANIFOLD BOLTS AND NUTS
14 - 19 ft.lbs (19 - 25 Nm)
FUEL RAIL AND LIGHT DUTY BRACKET BOLTS
6 - 8 ft.lbs (8 - 11 Nm)
