B2300 L4-2.3L (2008)
Front Fender Liner: Service and Repair
FENDER SPLASH SHIELD
Removal and Installation
NOTE: The RH fender splash shield electrical connector locators must be disconnected from the splash shield prior to splash shield removal. The
LH tender splash shield vacuum lines must be disconnected from the vacuum storage reservoir prior to splash shield removal.
1. Remove the 3 push-pins from inside the fender splash shield.
2. Remove the 2 bolts from the lower front of the fender splash shield.
NOTE: The LH front fender splash shield is equipped with 1 bolt and 1 nut. The RH front fender splash shield is equipped with 2 bolts.
3. Remove the bolt and the nut from the front fender splash shield.