mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Removal and Replacement|Page 3644 > < Removal and Replacement|Page 3642
Page 5
background image

Disassembly

WARNING:

-

The safety belt pretensioner is a pyrotechnic device. Always wear safely glasses when repairing an air bag equipped vehicle and when
handling a safety belt buckle pretensioner or safety belt retractor pretensioner. Never probe a pretensioner electrical connector. Doing so
could result in pretensioner or air bag deployment and could result in personal injury.

-

To reduce the risk of personal injury, do not use any memory saver devices.

NOTE:

-

If a seat equipped with a supplemental restraint system (SRS) component is being serviced, the SRS must be depowered.

-

The air bag warning lamp illuminates when the restraint control module (RCM) fuse is removed and the ignition switch is ON. This is normal
operation and does not indicate a SRS fault.

-

The SRS must be fully operational and free of faults before releasing the vehicle to the customer.

-

Driver seat shown, passenger seat similar.

1. Depower the SRS.

Removal and Replacement|Page 3644 > < Removal and Replacement|Page 3642