B2300 L4-2.3L (2008)
Coolant Reservoir: Service and Repair
COOLANT RECOVERY RESERVOIR REMOVAL / INSTALLATION
Removal and Installation
Warning:
^
To avoid personal injury, do not unscrew the coolant pressure relief cap while the engine is operating or hot. The coolant system is under
pressure; steam and hot liquid can come out forcefully when the cap is loosened slightly. Failure to follow these instructions can result in
personal injury.
1. Remove the cruise control servo mounting bolt and position the servo aside.
2. Disconnect the hoses and drain the engine coolant into a suitable container.
3. Remove the mounting bolts and remove the reservoir from the vehicle.
Note: Follow the cooling system replacement procedure.
4. To install, reverse the removal procedure.