B2300 L4-2.3L (2008)
9. Turn the engine until the No. 1 piston is at TDC.
10. Install the crankshaft TDC timing peg (2.3L) SST.
Caution:
-
Only hand-tighten the bolt or damage to the front cover can occur.
11. Using the 6 mm (0.23 in)x 18 mm (0.7 in) bolt, check the position of the crankshaft pulley.
-
If it is not possible to install the 6 mm (0.23 in) x 18 mm (0.7 in) bolt, correct the engine timing.
12. Using the camshaft alignment plate SST, check the position of the camshafts.
-
If it is not possible to install the camshaft alignment plate SST, correct the engine timing.
13. Remove the camshaft alignment plate SSTI.
