B2300 L4-2.3L (2008)
11. Release the tab and disconnect the passenger air bag module electrical connector.
12. Attach the restraint system diagnostic tool to the vehicle harness side of the passenger air bag module electrical connector.
13. Install the RCM fuse 8 (10A) to the SJB.
14. Connect the battery. See BATTERY DISCONNECT.
Reactivation
1. Remove RCM fuse 8 (10A) from the SJB.
2. Disconnect the battery and wait at least one minute. See BATTERY DISCONNECT.
3. Remove the restraint system diagnostic tool from the vehicle harness side of the passenger air bag module electrical connector.
4. Connect the passenger air bag module electrical connector.
5. Close the glove compartment door.
