B2300 L4-2.3L (2008)
1. Install a new CKP, but do not tighten the bolts at this time.
2. Adjust the CKP with the Crankshaft Position Sensor Alignment Jig and tighten the bolts.
3. Connect the CKP electrical connector.
4. Remove the M6 bolt.
1. Install a new CKP, but do not tighten the bolts at this time.
2. Adjust the CKP with the Crankshaft Position Sensor Alignment Jig and tighten the bolts.
3. Connect the CKP electrical connector.
4. Remove the M6 bolt.