B2300 L4-2.3L (2008)
5. Release the pressure on the fingers. The adjusting ring will stay in the reset position.
3. Using a suitable clutch aligner, position the clutch disc on the flywheel.
Note:
^
If reusing the clutch pressure plate, align using marks made during removal.
4. Using a suitable aligner, align the clutch disc and the clutch pressure plate. Install the bolts and tighten in a star-pattern sequence.
Note:
^
Before securing the transmission to the engine, connect the hydraulic line to the clutch slave cylinder.
5. Install the transmission.