B2300 L4-2.3L (2008)
Differential Output Shaft Bearing: Service and Repair
Axle Retainer Bracket Front Removal / Installation
AXLE RETAINER BRACKET FRONT REMOVAL / INSTALLATION
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Remove the bushing through-bolt.
3. Remove the three retainer bracket bolts.
4. To install, reverse the removal procedure.
Tightening torque: Retainer Bracket Bolts
64-91 Nm (6.5-9.3 kgfm, 47-67 ft.lb.)
Tightening torque: Bushing Through Bolt
60-80 Nm (6.1-8.2 kgfm, 45-59 ft.lb.)
