B2300 L4-2.3L (2008)
Drive/Propeller Shaft: Testing and Inspection
Propeller Shaft Indexing
PROPELLER SHAFT INDEXING
Note:
-
If propeller shaft components are replaced and propeller shaft vibration is encountered after installation, index the propeller shaft.
If indexing the propeller shaft does not eliminate the vibration, balance the propeller shaft.
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Disconnect the rear propeller shaft.
3. Rotate the rear companion flange.
4. Connect the propeller shaft.
5. Lower the vehicle and test drive.
6. Repeat procedure if necessary.