B2300 L4-2.3L (2008)
Transmission Speed Sensor: Service and Repair
Intermediate Shaft Speed (ISS) Sensor Removal / Installation
INTERMEDIATE SHAFT SPEED (ISS) SENSOR REMOVAL / INSTALLATION
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Disconnect intermediate shaft speed (ISS) sensor electrical connector.
3. Remove ISS sensor.
(1) Remove the screw.
(2) Remove the ISS sensor from the transmission.
(3) Inspect the ISS sensor O-ring for damage. If damaged, install a new O-ring.
4. Inspect and lubricate O-ring with petroleum jelly.
(1) Install the ISS sensor into the transmission.
(2) Tighten the ISS sensor screw.
5. Connect OSS sensor electrical connector.