B2300 L4-2.3L (2008)
4. Remove the 2 reservoir bolts and 2 reservoir nuts.
-
To install, tighten to 6 N-m (0.6 kgf-m, 53 in-lb).
5. Remove the windshield washer reservoir-to-coolant reservoir stud.
6. Position the coolant reservoir aside.
7. Remove the windshield washer reservoir.
8. Disconnect the windshield washer hose from the windshield washer pump.
Caution:
-
When removing the washer pump from the washer reservoir, be sure not to damage the rubber grommet.
9. Remove the washer pump from the washer reservoir.
10. To install, reverse the removal procedure.