B2300 L4-2.3L VIN D (2004)
Brake Drum: Service and Repair
BRAKE DRUM, REAR REMOVAL / INSTALLATION,
1. Remove spring nut and the brake drum.
2. Remove in order shown in the figure.
3. Inspect all parts and repair or replace as necessary.
4. Install in reverse order of removal.
5. After installation, check the following:
1. Add fluid and bleed the air.
2. Check for fluid leaks.
3. Depress pedal a few times, then verify that the brakes do not drag while rotating the wheel by hand.
Rear Brake Drum Removal Note
Caution:
