B2300 L4-2.3L VIN D (2004)
Coolant Line/Hose: Service and Repair
Water Bypass Hose
WATER BYPASS HOSE REMOVAL / INSTALLATION
1. Drain the cooling system.
2. Remove the transmission.
3. Disconnect the hose from the coolant outlet pipe.
Caution:
^
Remove the electrical connector locators from the splash shield prior to removal.
4. Remove the RH inner fender splash shield.
1. Remove the screws.
2. Remove the push pin.
3. Remove the bolts.
4. Remove the splash shield.
5. Remove the coolant bypass hose from the routing clip.
