B2300 L4-2.3L VIN D (2004)
12. Remove the bolts and the valve cover.
13. Remove the valve cover gaskets, if necessary.
Caution:
^
Do not use metal scrapers, wire brushes, power abrasive discs or other abrasive means to clean the sealing surfaces. These tools cause
scratches and gouges which make leak paths. Clean and inspect the sealing surfaces.
Installation
1. Install new valve cover gaskets, if removed.
2. Install the valve cover and bolts. Tighten the bolts in the sequence shown to 10 Nm (1 kgf-cm, 7 lbs.).
