B2300 L4-2.3L VIN D (2004)
9. Remove the A/C clutch field coil.
1. Mark the location of the A/C clutch field coil electrical connector.
2. Install Shaft Protector Tool for Coil Removal ST 49 UN01 047 on the nose opening of the A/C compressor.
3. Install a 2-jaw puller on the compressor with tip of the puller forcing screw in the center pilot. Place the jaws of the puller around the back
edge of the field coil Tighten the puller forcing screw to pull coil from compressor.
4. Remove the A/C clutch field coil.
10. Vehicles with 3 eye A/C clutch plate, install the A/C clutch plate.
11. Install the bolt.
1. Hold the A/C clutch plate with the special tool.
2. Tighten the bolt.
Installation Note
1. Clean the A/C clutch field coil and pulley bearing mounting surfaces.
CAUTION: Do not use air tools. The A/C clutch field coil can be easily damaged.
