B2300 L4-2.3L VIN D (2004)
Warranty. If the customer was placed in a rental car while the campaign was being completed and the vehicle is not within the mileage and time
limitations, you must obtain authorization for the rental. Submit a separate claim/problem using the standard rental claim information.
VERIFY THE VEHICLE NEEDS THE SSP
1.
Verify the vehicle is within the following ranges:
If the vehicle is within the above ranges, go to step 2.
If vehicle is not within the above ranges, return it to the customer.
2.
Perform a Warranty Vehicle Inquiry using your eMDCS System and inspect vehicle for an Authorized Modification Label SSP 63 attached to the
vehicle's bulkhead.
SSP 63 information available February 28, 2005 on eMDCS.
eMDCS System - Vehicle Status Inquiry Results
REPAIR PROCEDURES
Please refer to Attachment II.
Attachment II - Procedures and Installation of Label
A.
VEHICLE INSPECTION PROCEDURE
1.
Verify that the vehicle is within the following ranges:
^
2004 B-Series Truck (Automatic Transmission vehicles only) VIN Range: (4F4*R****4TM00003-M13059)
^
2005 B-Series Truck (Automatic Transmission vehicles only) VIN Range: (4F4*R****5PM00006-M02299)
-
If the vehicle is within the above range, proceed to step 2.
-
If the vehicle is not within the above range, return the vehicle to the customer or inventory.
