B2300 L4-2.3L VIN D (2004)
EGR Valve: Service and Repair
ELECTRIC EGR (EEGR) VALVE REMOVAL/INSTALLATION
1. Drain the cooling system.
2. Disconnect the battery ground cable.
3. Disconnect the exhaust gas recirculation (EGR) valve electrical connector.
4. Remove the rear driveshaft. See PROPELLER SHAFT REAR (4X2) REMOVAL/INSTALLATION or PROPELLER SHAFT REAR (4X4)
REMOVAL/INSTALLATION.
5. Remove the bolts retaining the catalytic converter to the muffler. Discard the exhaust converter outlet gasket.
NOTE: Manual transmission shown, automatic transmission similar.
6. Support the transmission with a suitable transmission jack.
