B2300 L4-2.3L VIN D (2004)
Electronic Brake Control Module: Description and Operation
ABS MODULE CONFIGURATION PRINCIPLES OF OPERATION
Note:
^
Newly released modules will require configuration after being installed on the vehicle. All configurable modules will be packaged in a kit, which
contains a warning label and a multilanguage sheet reemphasizing the requirements to configure replacement modules.
The Powertrain Control Module (PCM) must be reconfigured to the vehicle's specifications.
There are customer preference items that can or need to be configured on this vehicle. These are items that the customer may or may not want to have
enabled. Typically, customer preference items can be toggled on or off by the USE of a compatible scan tool. You may need to ask the customer
which preferences they had enabled prior to installation of the new module.
To carry out the customer configuration process, use a service function card and the WDS or equivalent tester. See the Customer Preference Index for
modules on the vehicle that have customer preference items. Configure the items as needed with a compatible scan tool.
Customer Preference Index