B2300 L4-2.3L VIN D (2004)
13. Use the Pitman Arm Puller or equivalent to separate the lower ball joint from the front wheel spindle.
14. Remove the front wheel spindle.
Spindle Installation
Caution:
^
Always install the cotter pin into the lower ball joint castellated nut from outboard to inboard, with the fingers bent together at a right angle.
Failure to do so will result in damage to the wheel and tire assembly.
1. Install the lower ball joint.
1. Install the castellated nut.
2. Install a new cotter pin.
2. Install the upper ball joint.
1. Install the ball joint into the spindle.
2. Install a new pinch bolt and nut.
3. Remove the coil spring compressor tool or equivalent.
Caution:
^
Always install the cotter pin into the tie rod castellated nut from outboard to inboard, with the fingers bent together at a right angle. Failure to
do so will result in damage to the wheel and tire assembly.
4. Install the tie rod castellated nut.
1. Install the castellated nut.
2. Install a new cotter pin.