B2300 L4-2.3L VIN D (2004)
4. Use Driver Handle SST 49-F027-003 and Axle Tube Bearing Replacer SST 49-H025-001 to install the inner wheel bearing oil seal.
5. Install the axle shaft.
Wheel Bearing and Oil Seal Rear (Limited Slip) Removal / Installation
WHEEL BEARING AND OIL SEAL REAR (LIMITED SLIP) REMOVAL / INSTALLATION
Removal Note
1. Remove the axle shaft.
Note:
^
If the wheel bearing oil seal is leaking, the axle housing vent may be plugged with debris.
2. Use Impact Slide Hammer SST 49-02236-30B, Rear Axle Bearing Remover SST 49-UN01-033 and Adapter SST 49-UN11-101 to remove the
rear axle bearing and wheel bearing oil seal.
Installation Note
1. Lubricate the new rearwheel bearing with lubricant.
2. Use Driver Handle SST 49-F027-003 and Axle Tube Bearing Replacer SST 49UN01033 to install the rear wheel bearing.
3. Lubricate the lip of the new wheel bearing oil seal with appropriate grease.
4. Use Driver Handle SST 49-F027-003 and Axle Tube Bearing Replacer SST 49-UN01-033 to install the inner wheel bearing oil seal.
5. Install the axle shaft.
