B2300 L4-2.3L VIN D (2004)
11. Push the transmission case (16 pinch) electrical connector out of transmission case.
12. Remove the manual valve inner lever nut.
13. Remove the manual valve inner lever and parking lever actuating rod.
Note:
^
To maintain initial driveshaft balance, mark the rear driveshaft yoke and axle flange so they may be installed in their original position.
14. Mark the rear propeller shaft.
15. Remove the rear propeller shaft.
16. If equipped, remove the transfer case.
Note:
^
If damage is found to the parking gear, the transmission must be removed and disassembled.
The parking pawl, parking pawl return spring and parking pawl shaft may fall out during removal of the extension housing.
17. Remove the extension housing. Discard the extension housing gasket.
