B2300 L4-2.3L VIN D (2004)
Caution:
^
Align the slot on the TSS sensor electrical connector with the slot in the 16 pin case connector.
4. Install the transmission case (16 pinch) electrical con
1) Lubricate the transmission case (16 pinch) electrical retaining spring connector O-rings with petroleum jelly.
5. Install the EPC and SS2 solenoids.
Caution:
^
The solenoid clamp must be installed in the TCC and EPC solenoid grooves, shift solenoid pockets and the No. 204 plug.
6. Install the solenoid clamp.
1) Position the solenoid clamp on the main control valve body.
2) Install the solenoid clamp bolts.
7. Connect the SS1 and SS3 shift solenoid electrical connectors.